Embedder

Setting Description
#Emb-AB-Mode With Emb-AB-Mode you select how the audio in groups A and B should be embedded into the video: overwrite the existing audio, or Append. Default is Overwrite.
#EmbA_Grp With this setting you select into which audio group (= 4 audio channels) of the outputs you want to embed the first 4 forwarded audio channels coming from the de-embedders/add-on bus. Can be group1, group2, group3 or group4. You can also choose to not use these 4 audio channels for anything by setting this item to off. By default it is set to Group1.
#EmbA1_Inp ~ #EmbA4_Inp

With these settings you can select where the corresponding audio channels (channel A1 till channel A4) of the outputs are coming from. In this card you can choose to get the audio from the de-embedder of SDI input 1 (Demb-SDI1) or SDI input 2 (Demb-SDI2), the embedder of the active input (Demb-Input, dependent on the current active input), from the ADD-ON bus groups, or to mute the corresponding channel (set to off). Defaults here are Off.

 

With this card, the ADD-ON bus can only be used to either embed audio or de-embed audio. When one of the EmbXx_Inp settings is set to embed from the ADD-ON bus, no audio will be de-embedded towards the bus anymore, not for any of the channels.

#EmbA1_Inp_Ch ~ #EmbA4_Inp_Ch

(2GF110 only)

 With these settings you can select which Channel of the selected input should be embedded to the corresponding output channel. Can be any channel between Ch_1 through Ch_16. Defaults for A1 through A4 are respectively Ch_1 through Ch_4.
#EmbB_Grp With this setting you select into which audio group (= 4 audio channels) of the outputs you want to embed the second 4 forwarded audio channels coming from the de-embedders/add-on bus. Can be group1, group2, group3 or group4. You can also choose to not use these 4 audio channels for anything by setting this item to off. By default it is set to Group2.
#EmbB1_Inp ~ #EmbB4_Inp

With these settings you can select where the corresponding audio channels (channel B1 till channel B4) of the outputs are coming from. In this card you can choose to get the audio from the de-embedder of SDI input 1 (Demb-SDI1) or SDI input 2 (Demb-SDI2), the embedder of the active input (Demb-Input,dependant on the current active input), from the ADD-ON bus groups, or to mute the corresponding channel (set to off). Defaults here are Off.

Note: With this card the ADD-ON bus can only be used to either embed audio or de-embed audio. When one of the EmbXx_Inp settings is set to embed from the ADD-ON bus, no audio will be de-embedded towards the bus anymore, not for any of the channels.

#EmbB1_Inp_Ch ~ #EmbB4_Inp_Ch

(2GF110 only)

 With these settings you can select which Channel of the selected input should be embedded to the corresponding output channel. Can be any channel between Ch_1 and Ch_16. Defaults for B1 till B4 are respectively Ch_5 till Ch_8.
#Emb-CD-Mode With Emb-AB-Mode you select how the audio in groups C and D should be embedded into the video: overwrite the exsisting audio, or Append. Default is Overwrite.
#EmbC_Grp With this setting you select in to which audio group (= 4 audio channels) of the outputs you want to embed the third group of 4 forwarded audio channels coming from the de-embedders/add-on bus. Can be group1, group2, group3 or group4. You can also choose to not use these 4 audio channels for anything by setting this item to off. By default it is set to Group2.
#EmbC1_Inp ~ #EmbC4_Inp

With these settings you can select where the corresponding audio channels of the outputs are coming from. In this card you can choose to get the audio from the de-embedder of SDI input 1 (Demb-SDI1) or SDI input 2 (Demb-SDI2), the embedder of the active input (Demb-Input, dependent on the current active input), from the ADD-ON bus groups, or to mute the corresponding channel (set to off). Defaults here are Off.

Note: With this card the ADD-ON bus can only be used to either embed audio or de-embed audio. When one of the EmbXx_Inp settings is set to embed from the ADD-ON bus, no audio will be de-embedded towards the bus anymore, not for any of the channels.

#EmbC1_Inp_Ch ~ #EmbC4_Inp_Ch

(2GF110 only)

 With these settings you can select which Channel of the selected input should be embedded to the corresponding output channel. Can be any channel between Ch_1 and Ch_16. Defaults for C1 till C4 are respectively Ch_9 till Ch_12.
#EmbD_Grp With this setting you select in to which audio group (= 4 audio channels) of the outputs you want to embed the last 4 forwarded audio channels coming from the de-embedders/add-on bus. Can be group1, group2, group3 or group4. You can also choose to not use these 4 audio channels for anything by setting this item to off. By default it is set to Group2.
#EmbD1_Inp ~ #EmbD4_Inp

With these settings you can select where the corresponding audio channels of outputs B are coming from. In this card you can choose to get the audio from the de-embedder of SDI input 1 (Demb-SDI1) or SDI input 2 (Demb-SDI2), the embedder of the active input (Demb-Input, dependent on the current active input), from the ADD-ON bus groups, or to mute the corresponding channel (set to off). Defaults here are Off.

Note: With this card the ADD-ON bus can only be used to either embed audio or de-embed audio. When one of the EmbXx_Inp settings is set to embed from the ADD-ON bus, no audio will be de-embedded towards the bus anymore, not for any of the channels.

#EmbD1_Inp_Ch ~ #EmbD4_Inp_Ch

(2GF110 only)

 With these settings you can select which Channel of the selected input should be embedded to the corresponding output channel. Can be any channel between Ch_1 and Ch_16. Defaults for C1 till C4 are respectively Ch_13 till Ch_16.

#EmbA1_Gain ~ #EmbD4_Gain

(2GF110 only)

 Adjusts the gain for the corresponding audio channel between -60 and 12dB. Everything below -999 dB means the audio will be muted.

#EmbA1_Phase ~ #EmbD4_Phase

(2GF110 only)

 Adjusts the audio phase of the corresponding to 0 deg or 180 deg.